• Three to five years' related experience and/or training REQUIRED; or equivalent combination of education and experience.

• Compares product with parts list, blueprints, specifications, or sample model to ensure completion and correctness of the assembly or subassemblies.
• Verifies specified dimensions using proper test equipment and procedures.
• Identifies rejected parts with prescribed methods.
• Tests products for structural flaws.
• Maintains records on all defects and number of parts rejected.
• Uses statistical sampling plans when required to conduct inspections.
• Assists in training new technicians, when required.
• Responsible for general housekeeping of work area.
• Interacts with customers as required.
• Assist engineers during investigations of failures (root cause analysis) as required.
• Demonstrates Company core values of honesty, integrity, and respect
• Other duties as assigned.

• Monitors inspections to ensure compliance with processes and testing are required to maintain quality and reliability of products.
• Recommends improvements to Quality Assurance processes, QAS's, and manufacturing processes.
• Communicates with direct supervisors and PMT groups to make necessary changes to audits/inspections.

• Following all rules, regulations, and procedures set forth in the safety manual.
• Promoting safety awareness throughout the workplace.
• Alerting supervisors to any safety hazards they discover.
• Wearing appropriate, proper protective equipment whenever required.
• Using guards on tools and machinery whenever required.
• Following proper lifting techniques using legs and not the back.
• Operating any vehicles, equipment, tools, or machines only if they are authorized to do so.
• Reporting any injury or loss immediately to the supervisor/team lead.
• Promoting a positive attitude about safety and never performing any unsafe practice that could place the employee or others in danger.
• Providing information to their immediate supervisor if a better and safer procedure can be implemented in performing any operation.
• Independent Judgment
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

• Ability to use common sense and knowledge of industry to handle daily questions/issues from workers, managers, customers, etc.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to troubleshoot inspection equipment/instrument interactions using reference materials available (STM, SOP, Operators Manual).

• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to write short correspondence.
• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

• Basic computer skills associated with traditional PC-based software such as Microsoft Office and Lotus Notes required.
• Ability to comprehend and interpret basic measurement techniques including reading scales (rulers).
• Basic understanding of dimensional inspections with familiarity of using calipers and micrometers.
• Ability to read and interpret blueprints, to include discerning specifications (in tolerance / out of tolerance) and converting fractions and decimals.

• Working knowledge of inspections/audits, standard operating procedures, and ISO standards a plus.
• Basic understanding of Geometric Dimensioning and tolerancing and cycle counting a plus.

• While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds, and occasionally lift and/or move up to 50 pounds. In the event the employee must move over 35 pounds, a team lift or mechanical device must be used. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

• High School Diploma.
• One-year certificate from college or technical school is preferred.

• Three to five years' related experience and/or training REQUIRED; or equivalent combination of education and experience.

• Compares product with parts list, blueprints, specifications, or sample model to ensure completion and correctness of the assembly or subassemblies.
• Verifies specified dimensions using proper test equipment and procedures.
• Identifies rejected parts with prescribed methods.
• Tests products for structural flaws.
• Maintains records on all defects and number of parts rejected.
• Uses statistical sampling plans when required to conduct inspections.
• Assists in training new technicians, when required.
• Responsible for general housekeeping of work area.
• Interacts with customers as required.
• Assist engineers during investigations of failures (root cause analysis) as required.
• Demonstrates Company core values of honesty, integrity, and respect
• Other duties as assigned.

• Monitors inspections to ensure compliance with processes and testing are required to maintain quality and reliability of products.
• Recommends improvements to Quality Assurance processes, QAS's, and manufacturing processes.
• Communicates with direct supervisors and PMT groups to make necessary changes to audits/inspections.

• Following all rules, regulations, and procedures set forth in the safety manual.
• Promoting safety awareness throughout the workplace.
• Alerting supervisors to any safety hazards they discover.
• Wearing appropriate, proper protective equipment whenever required.
• Using guards on tools and machinery whenever required.
• Following proper lifting techniques using legs and not the back.
• Operating any vehicles, equipment, tools, or machines only if they are authorized to do so.
• Reporting any injury or loss immediately to the supervisor/team lead.
• Promoting a positive attitude about safety and never performing any unsafe practice that could place the employee or others in danger.
• Providing information to their immediate supervisor if a better and safer procedure can be implemented in performing any operation.
• Independent Judgment
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

• Ability to use common sense and knowledge of industry to handle daily questions/issues from workers, managers, customers, etc.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to troubleshoot inspection equipment/instrument interactions using reference materials available (STM, SOP, Operators Manual).

• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to write short correspondence.
• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

• Basic computer skills associated with traditional PC-based software such as Microsoft Office and Lotus Notes required.
• Ability to comprehend and interpret basic measurement techniques including reading scales (rulers).
• Basic understanding of dimensional inspections with familiarity of using calipers and micrometers.
• Ability to read and interpret blueprints, to include discerning specifications (in tolerance / out of tolerance) and converting fractions and decimals.

• Working knowledge of inspections/audits, standard operating procedures, and ISO standards a plus.
• Basic understanding of Geometric Dimensioning and tolerancing and cycle counting a plus.

• While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 35 pounds, and occasionally lift and/or move up to 50 pounds. In the event the employee must move over 35 pounds, a team lift or mechanical device must be used. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

• High School Diploma.
• One-year certificate from college or technical school is preferred.

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.